ElecGear 4X Substitute Joystick (EL3 ALPS) Appropriate with Nintendo Swap Professional and PS3 Wi-fi Controller, Analog Stick Controller Sensor Meeting Thumbstick Module

Value: $12.98
(as of Jul 09,2022 08:25:46 UTC – Particulars)

EL3 for Swap Professional and a few PS3 controllers
4x substitute analog joystick work with Nintendo Swap Professional and a few PS3 controllers. The thumbstick module was made by ALPS. This RKJXV stick controller sequence comes with 10KΩ trimmer potentiometers. The analog stick is available in darkish grey backside plate with two plastic sticks inserting within the PCB. It locks in 3 instructions when not sit in controller cowl. The trim pot resistors will be in inexperienced or black. It’s extensively utilized in Swap Professional controller. Some reported additionally it is utilized in 8Bitdo SNES controllers

✔ Exchange the wiper alone even with out soldering
In some circumstances, you’ll be able to simply exchange the wheel within the potentiometer to resolve particular issues like: Stuttering, useless zone, creeping, or not as responsive appropriately
✔ Exchange the potentiometer alone with an iron
80% probabilities of joystick downside are attributable to the sensor. In one other phrases, the rotary mechanism and the tactile switches will not be the issue. De-soldering the unit with solely 3Pin will be simpler than changing the whole module with as many as 14 prongs
✔ A warmth gun to switch the entire module
That is essentially the most advised for an skilled soldering knowledgeable
✔ Consultants with a standard iron to switch the entire unit
For a soldering knowledgeable with no skilled de-soldering wick braid, solder sucker pump or scorching air rework station at hand. To make it straightforward, we recommend crushing the issue joystick into sufficiently small items with a pair of pliers
✔ By skilled technicians in a cellphone restore store
Instructed for somebody with no helpful instruments

[EL3 for Switch Pro Controller] – 4x substitute analog joystick work with Nintendo Swap Professional and a few PS3 controllers. The thumbstick module was made by ALPS. This RKJXV stick controller sequence comes with 10KΩ trimmer potentiometers
[Compatibility] – This model of analog stick is available in darkish grey backside plate with two plastic sticks inserting within the PCB. It locks in 3 instructions when not sit in controller cowl. The trim pot resistors will be in inexperienced or black. It’s extensively utilized in Swap Professional controller. Some reported additionally it is utilized in 8Bitdo SNES controllers
[Additional Resistor] – Difficult transferring mechanism and every day put on and tear lastly brought about drifting. Even new sensors can’t be 100% balanced. Calibrating in controller settings won’t work. We packed 10x correction resistors to resolve the potential downside in {hardware} stage. Solder one or two paralleled tiny resistors onto the potentiometer at the wrong way in opposition to drifting. It is going to assist appropriate 3 to five levels drifting
[When to replace] – The analog joystick must be changed when your controller has the issue of drifting, creeping, stuttering, a blind spot, a useless spot, a useless zone, no response when clicking, or it would not heart after years of wear and tear and tear. The OEM real restore elements guarantee accuracy and extend lifespan
[Reminder of Operation] – With as many as 14 prongs, de-soldering and soldering the entire module takes severe abilities. Skilled restore with a warmth gun is usually recommended. You may merely exchange the facet potentiometer sensor alone to resolve many of the joystick issues