HCDC RPi GPIO Standing LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
$18.99
Value: $18.99
(as of Jul 09,2022 15:23:23 UTC – Particulars)
1, The merchandise has been soldered and assembled. Assist for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
2, GPIO standing LED and energy 5V / 3.3V indication. GPIO output or enter stage excessive LED on, output or enter stage low LED off. 5V blue, 3.3V crimson, GPIOs inexperienced. The place of the LED is in a one-to-one correspondence with the place of the Raspberry Pi 2x20pin connector, and the logic stage of the GPIO will be noticed in a short time and intuitively. The driving present of every LED is just 0.1mA, so you do not have to fret about it affecting the learn and write standing of GPIO.
3, Terminal block pitch 3.5mm/0.138 inch, wire measurement vary 26AWG to 16AWG, strip size 5mm, screw M2 metal, pin header and cage copper. 2 x 20 pins enlargement pin header, peak 8mm/0.32 inch
4, Packing record: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts
(NOTE: the merchandise not embrace Raspberry Pi Board).
Package deal Dimensions : 3.82 x 3.43 x 1.26 inches; 1.76 Ounces
Date First Out there : September 17, 2018
Producer : Xiken Digital Expertise Co., Ltd.
ASIN : B08RDYDG6X
The merchandise has been soldered and assembled. Assist for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
GPIO standing LED and energy 5V / 3.3V indication. GPIO output or enter stage excessive LED on, output or enter stage low LED off. 5V blue, 3.3V crimson, GPIOs inexperienced. The place of the LED is in a one-to-one correspondence with the place of the Raspberry Pi 2x20pin connector, and the logic stage of the GPIO will be noticed in a short time and intuitively. The driving present of every LED is just 0.1mA, so you do not have to fret about it affecting the learn and write standing of GPIO.
Terminal block pitch 3.5mm/0.138″, wire measurement vary 26AWG to 16AWG, strip size 5mm, screw M2 metal, pin header and cage copper. 2 x 20 pins enlargement pin header, peak 8mm/0.32″.
Packing record: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the merchandise not embrace Raspberry Pi Board).
