Johan Simbade
Refrigerator and Freezer Parts List – Essential Refrigerator Repair Information
Refrigerator and Freezer Parts Identification are perhaps the most important part of maintaining your refrigerators’ condition. Refrigerator parts breakdowns occur regularly and with proper maintenance, this problem too can be avoided. This article provides some useful tips and facts about refrigerator and freezers.
Refrigerator and Freezer Parts Identification helps you identify the malfunctioning components with ease. In case, if the temperature in the refrigerator gets very cold, the most likely reason behind this problem is the condenser condensing air. This part works like a compressor to absorb the heat from the liquid inside the refrigerator while the lights are on. When this part fails, it will prevent the refrigerator or freezer from getting cooled, emit a quiet screeching noise and/ or just slow down considerably, thereby causing the freezer or refrigeration section to get extremely warm.
Therefore, the condenser fan motor plays an important role in maintaining the temperatures of your refrigerator or freezer sections. Therefore, they need to be checked on a regular basis. However, this process may take up quite a bit of time, especially in the cooler months of the year when the temperature of the surroundings is falling. In this case, it may be advisable to perform the condenser maintenance before the start of the cold season. Refrigerator and Freezer Parts Identification guides you to locate the various components of your refrigerator, so that you can easily check them on a regular basis and make sure that they are working properly.
Some common refrigerator parts include the display screen, thermostat, drip tray, dryer, food and beverage dispenser, blender, food level monitor and icemaker. Of course, these parts do not require much maintenance, but you should still check them on a regular basis. The condenser fan motor is a good example of this. This component will slow down the cooling system if there are any problems with it. If you are experiencing any unusual noises or buzzing sounds from your refrigerator, it would be advisable to check the following components as well:
Before attempting any testing procedures, always unplug the refrigerator from its power source. And, before beginning, make sure that the condenser is turned off, as well as the drain plug close to it. Now, you can either disconnect the condensers from the outlet using pliers, or, if it has a model that does not have this feature, open the cover of the appliance and carefully remove all the screws securing the condensers to the inside. Once you have successfully removed the condensers from their respective outlets, you will now be able to remove them from their compartment. It is important to remember that you should never clean the condensers using any chemical cleaners, as this can damage the interior components.
Once you have successfully performed all the necessary tests, you should read the components’ manual that comes with your refrigerator to ensure that you are operating the refrigerator in a correct manner. If there are no problems with the refrigerators, you can proceed to the next step. However, if the above-mentioned tests indicate that your refrigerator is not functioning normally, it is advisable to contact a local repair company. The repairmen can check for other possible refrigeration and cooling issues on your refrigerator and determine whether it needs to be repaired or replaced, or maybe even both.
